Fishery photovoltaic
In order to ensure the safety, stability and reliability of the mounting system for fishery photovoltaic, the whole support structure of the solution adopts the light and high strength magnesium aluminum zinc steel welded and formed hollow section. Through strict calculation and testing, fully considering the bearing, wind resistance, earthquake resistance and other factors. Compared with the traditional products, the magnesium aluminum zinc bracket has better corrosion resistance and a certain automatic repair ability with better protection ability for the cutting edge.
GRT STEEL OM Profile for Solar Bracket(Main Column, Main Beam, Purlin) | ||
Raw Material | Zinc Al Mg Steel Strips | |
Grade | S350GD+ZM275;S420GD+ZM275;S550GD+ZM275 | |
Thickness | 1.5/1.8/2.0/2.5/3.0/4.0mm | |
ZM Coating | 275/310g/m2 | |
Profile Type | Profile U/Profile C/Profile OM | |
Parts | Ground screw;Base Bracket; Column;Rail;Rafter;Connector | |
Usage | Agrivotaic Farm |
Advantages of Zinc-Al-Mg Solar Mounting Bracket
As solar power grows in popularity as an alternative energy source, the importance of durable and efficient mounting brackets cannot be overemphasized. Material selection is critical to ensuring a durable and successful installation. Zinc-aluminum-magnesium steel is the best choice for solar mounting brackets because it offers a unique combination of strength, corrosion resistance, and stability.
1. High strength to weight ratio
Zinc-aluminum-magnesium alloys have a higher strength-to-weight ratio than other traditional stent materials such as steel and aluminum. This means the material is lightweight but strong enough to hold the solar panels securely in place, reducing shipping costs and making installation quicker and easier.
2. Corrosion resistance
Zinc-aluminum-magnesium steel has superior corrosion resistance, making it ideal for outdoor and harsh environments. The material's corrosion resistance extends the life of the bracket and improves the overall durability of the solar panel system. Additionally, zinc-aluminum-magnesium alloys are highly resistant to sea salt and other environmental pollutants, making them ideal for installing solar panels in coastal areas.
3. Minimal maintenance
Once installed, Zn-Al-Mg solar mounting brackets require minimal maintenance, reducing overall maintenance costs and man-hours. This material eliminates problems such as rust, corrosion, and peeling paint, and requires less maintenance than other traditional bracket materials.
4. Environmental friendly
The natural composition of the zinc-aluminum-magnesium alloy makes it environmentally friendly. The material is 100% recyclable and has a low carbon footprint, making it a sustainable choice for solar panel systems. This aligns with solar energy's goal of reducing dependence on fossil fuels and minimizing damage to the environment.
Agrivoltaic Fram
![fishing PV](http://www.grtever.com/uploads/fishing-PV2.jpg)
The advantages of fishery photovoltaic
1. Improve land utilization rate
Traditional solar power stations usually need to occupy a lot of land resources, while fish-light complementation can use the space resources of the water surface of the fishery aquaculture, without additional land. This can not only improve land utilization, but also reduce the pressure on land resources.
2. Reduce ecological impact
Compared with traditional solar power stations, fish-light complementarity has less impact on the ecological environment. Because it uses water for fisheries, not agricultural land or natural ecosystems. At the same time, fish-light complementarity can also improve water quality and increase the yield and quality of aquaculture.
3. Save energy
The fish-light complementary model can make full use of solar energy resources and reduce the dependence on traditional energy sources, so as to achieve the purpose of energy saving and emission reduction. In addition, complementary fishing and light can also provide clean and sustainable energy support for the local economy.
4. Improve economic efficiency
The fish-light complementary model can not only provide clean and sustainable energy support for the local economy, but also bring dual economic benefits through fishery farming and photovoltaic power generation. This model can provide employment opportunities for local farmers and increase sources of income.
FAQ
1. What is your MOQ?
500kg for general products. More than 5 tons for new products.
2. Can you produce Zinc Aluminum Magnesium profiles by drawing?
We have professional engineer to design CAD drawing and establish mould according to customers' requirement.
3. What certification do you have? What's your standard?
We have ISO certification. Our standard is DIN, AAMA, AS/NZS, China GB.
4. What's the delivery time for samples and mass production?
(1). 2-3 weeks to open the new moulds and make free samples.
(2). 3-4 weeks after receipt of deposit and confirmation of the order.
5. What's the packing way?
Commonly we use shrink films or kraft paper, also we can make as per customers' requirements.
6. What's the payment terms?
Usually by T/T, 30% deposit and the balance paid before shipment, L/C is also acceptable.